Shandong Heavy Industry Machinery Co.,Ltd.
Quality First,Service Best
Add to Cart
1. Multiple capacity levels for a single machine, easy configuration
The single unit capacity of the diesel engine group ranges from several kilowatts to tens of thousands of kilowatts. According to the application and load conditions, there is a wide range of capacities to choose from, and it has the advantage of being suitable for electric loads of various capacities. When using diesel engines as emergency and backup power sources, one or more devices can be used, and the installed capacity can be flexibly configured according to actual needs.
2. Light weight per unit power and flexible installation
The supporting equipment of the diesel generator set is relatively simple, less supporting equipment, small in size and light in weight. Taking high-speed diesel engine as an example, it is generally 8 ~ 20 kg/kW, and the index of steam power unit is more than 4 times larger than that of diesel engine. The characteristics of diesel generators are flexible and easy to move.
Diesel generators used as main power sources for independent power sources are mostly configured independently, and standby or emergency diesel generators are often used with variable devices. Diesel generators are generally not paralleled with the city power grid, and there is sufficient water source (the cooling water consumption of diesel engines is 34~82L/(KW.h)), which is only 1/10 of that of turbogenerators. The installation area is small, so the installation site is comparatively small. flexible.
3. High thermal efficiency and low fuel consumption
The effective thermal efficiency of a diesel engine is 30-46%, that of a high-pressure steam turbine is 20-40%, and that of a gas turbine is 20-30%. Due to the relatively high effective thermal efficiency of a diesel engine, the fuel consumption is relatively low.
| Machine data | |
| Type | in-line, six-cylinder, four-valve, four-stroke |
| Intake method | Supercharging, air-to-air cooling |
| Bore X stroke | 110mmX136mm |
| Displacement | 7.8L |
| Compression ratio | 17.5:1 |
| Firing sequence | 1-5-3-6-2-4 |
| Cylinder distance | 137mm |
| Combustion chamber type | ω type |
| Engine dimensions (length X width X height) | 1816x864x1398mm |
| Engine weight (including flywheel, excluding generator) | 850kg |
| Moment of inertia of flywheel | 2.25Kgm 2 |
| Intake and exhaust system | |
| Rated point exhaust back pressure | 15KPa |
| Exhaust temperature | 550°C |
| Exhaust flow | 1150Kg/h |
| Intake flow | 1101Kg/h |
| Allowable maximum intake resistance (clean filter element) | 3.5KPa |
| Allowable maximum intake resistance (dirty filter element) | 6.5KPa |
| Intake resistance alarm value | 6.3KPa |
| cooling system | |
| Coolant main content | 50:50 (ethylene glycol: water) |
| Coolant outlet temperature | 95°C |
| The temperature difference between the inlet and outlet of the coolant is | 5.1℃ |
| Radiator heat dissipation | 115KW |
| Radiator flow rate | 320L/min |
| Alarm temperature | 104℃ |
| Air intake type | air-to-air cooling |
| Allowable pressure drop of intercooler | 11-13KPa |
| Intercooler heat dissipation | 40KW |
| The allowable intake air temperature of the intercooler is | 190°C |
| The maximum air intake of the intercooler is | 1101Kg/h |
| lubrication system | |
| Engine oil pressure@idle speed | 130KPa |
| Engine oil pressure@rated point | 500KPa |
| Maximum allowable oil temperature | 120°C |
| Oil pan capacity low | 24L |
| Oil pan capacity high | 29L |
| Allowable inclination angle of oil pan @forward | 30° |
| Allowable inclination angle of oil pan @backward tilt | 30° |
| Allowable inclination angle of oil pan @ fuel pump side elevation angle | 30° |
| Allowable inclination angle of oil pan @ exhaust side elevation angle | 30° |
| Fuel System | |
| Oil pump system type | High pressure common rail |
| Injection pressure of injector | 1600bar |
| Fuel temperature | 38±5℃ |
| The maximum allowable resistance of fuel pump inlet pipe (clean filter element) | 10KPa |
| The maximum allowable resistance of fuel pump inlet pipe (dirty filter element) | 24.7KPa |
| Electric start system | |
| Standard starter voltage | 24V |
| Minimum average starting speed without auxiliary cold start | 130r/min |
| Minimum temperature without auxiliary cold start | -15°C |
1. OEM Manufacturing welcome: Product, Package.
2. We will reply you for your inquiry in 24 hours.
3. After sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback. If you have any questions about the problem, contact with us, we will offer
the solve way for you.
1. Either original or OEM parts, we have lots of directly suppliers to choose. You could get HOWO/SHACMAN/HONGYAN/FAW spare parts bellow market price.
2. “One-shop purchasing service”: Quotation--Preparation--Delivery. With 10+year experience, we proficient in parts business management process.
3. After getting your order, we will take pictures of every parts for you. Even if you have 500 items.
4. Has Sinotruk parts system, we can get the exact information according the chassis no and assembly nameplate , accurate rate reaches 95%.
5. Our boss is very familiar with the working principle and maintenance of trucks.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We will show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.